USB Devices

By default, USB devices you plug in to your physical host are not available to your vserver guests. To make all your USB devices available to a specific guest, follow these instructions:

Unhide the `/proc/bus/usb` directory

On the host, you can do one of the following:

To do it as a one-off, type the following as root:

vnamespace -n bash
umount -n /proc/bus/usb
setattr --~hide /proc/bus
setattr --~hide /proc/bus/usb

Note: this creates a new namespace and lauches bash in that context. It then umounts the USB filesystem and then unhides the USB subsystem. Note that this doesn't unmount USB for the host, or any existing guests, but the umount is necessary for the setattr to take effect.

To make this persist for a specific guest, add the following to `/etc/vservers/<guest>/scripts/pre-start`:

vnamespace -n bash -c "umount -n /proc/bus/usb ; setattr --~hide /proc/bus ; setattr --~hide /proc/bus/usb"

Mount the USB filesystem in the guest

Now we edit the `fstab` file for the guest. The following works on a host running Debian Etch and a guest running Ubuntu 6.06.1. To find the way that `usbfs` is mounted in the host, I used:

cat /proc/mounts | grep usbfs

which returned:

usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0

Paste this line (or the one that suits your distro) to the end of `/etc/vservers/<guest>/fstab`, and restart the guest.

Test it

Now enter the guest, and see if you can see `/proc/bus/usb/devices`. Better still, plug in a USB device and see if it shows up in there.

Thanks

Information came from this thread (credit: Daniel Hokka Zakrisson) and from followup in IRC on 21 April 2007, again credit to Daniel.